1984 Astroglass Composite Transom enter text here

1994 Stratos 270 enter text here

1995 Ranger 487 Composite Transom Repair I don't know the history of Ranger Boats, but I think after a certain year they were all made with composite boards or a comparable material, just not wood. Nor do I research other [...]

1995 Nitro 180FS Blk-Red For me this would be my average basic transom replacement for a bass boat. My customer did mention that there had been previous repairs done to the transom by the previous owner. Once I started working [...]

1987 Pro Craft 1660 Grey-Sliver This is another one of my transom repairs where I cut a section of the hull out to gain access to replace the transom. If this is the first time you've seen this through your [...]

1987 Ski Barge Custom Transom Add Description:

1985 Kingfisher Add Description:

2004 Stratos 201Pro Clear Coat Here I have pictures of a clear coat job that is prepped out and ready for clear, then the finished product. What I don't have pictures of (Part of a 2 year period where I just [...]

2001 Nitro 175 Sport-Floor Repair This is a floor repair where a little creativity was necessary. The factory core material for the floor was a light weight honeycomb balsa, which works ok until it gets wet, then it doesn't take [...]

1994 Skeeter 200sx Faded Clear Example of a GOOD wet sanding, buffing, polishing and detailing on an older bass boat. But I have to say that this boat was neglected for years and should not have gotten this bad. Please check [...]

1993 Javalin 409t clear coat Older Bass Boat that looks like crap? A new clear coat can revive the look! Applying a new clear coat is on a case by case situation. In this case, this boat had been cleared [...]

1993 Procraft 18ft Drain Hole Damage Here we a have an example of what I would call preventative maintenance, the floor was getting soft around the floor drain and I discovered a stringer partially rotting out. This was caught in time before it [...]

1986 Ranger 350v Recondition Here is an example of recondition of a bass boat. First of all, older boats must be inspected for structural integrity and the engine inspected before any cosmetic work be considered. In this case the customer [...]